Clearance SaleMakerbase Printer-Parts Leveling-Sensor Mk8 Ender Auto-Bed Bltouch 3D Tevo Anet A8 Reprap
Makerbase Printer-Parts Leveling-Sensor Mk8 Ender Auto-Bed Bltouch 3D Tevo Anet A8 ReprapCloseout Deals 47% Exemptionfor Clearance SaleMakerbase Printer-Parts Leveling-Sensor Mk8 Ender Auto-Bed Bltouch 3D Tevo Anet A8 Reprap, perfect quality assurance from trusted company.
€ 10,14 - 25,38
(based on 276 user reviews)
Producer: MaJackIdentifier: 32890485972
Volume Retail Sales: MaJack piece
Availability: 626 pieces
Last Update : Wed, 27 Jan 2021
Product Details
Clearance SaleMakerbase Printer-Parts Leveling-Sensor Mk8 Ender Auto-Bed Bltouch 3D Tevo Anet A8 Reprap Specification & Description Summary
Clearance SaleMakerbase Printer-Parts Leveling-Sensor Mk8 Ender Auto-Bed Bltouch 3D Tevo Anet A8 Reprap Specification
- Brand NameMakerbase
- OriginCN(Origin)
- Item TypeAuto Self-Leveling Sensor
- Model Number3D Touch
- Work with LCD12864 and MKS Robin E3D SGen_L Gen_L:
- https://youtu.be/r2A0b7XQEaI
- Work with MKS TFT35 and Robin E3D SGen_L Gen_L:
- https://www.youtube.com/watch?v=CB1x841_WYo
- Work with MKS Robin Nano V1.X:
- https://www.youtube.com/watch?v=rhvEH_DBLtg
- Replacement needle:https://www.aliexpress.com/item/4000842314046.html
- Used on CR-10 / Ender-3 3D printer:https://www.aliexpress.com/item/4001211961989.html
Shipping List:
Overview:
The 3DTouch auto leveling sensor is a device that uses the Hall effect to achieve leveling. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing. Printing can also be achieved even though the platform is not flat.
Parameter:
| Voltage | 5V |
| Current | 15mA |
| Max current(peak) | 300mA |
| Shell material | PC |
| Shell color | White |
| Cable length | Short: 200mm Long: 1000mm |
| Wire | 3pin: Green: -GND Red: +5V Orange: Signal cable 2pin: Black: -,GND White: Zmin |
Size:
Action instruction table:
| 3D Touch Action Instruction Table | |||
| Action | G-code | ||
| Marlin Firmware | Repetier Firmware | Smoothieware Firmware | |
| Push-pin down | M280 P0 S10 | M340 P0 S700 | M280 S3.0 |
| Push-pin up | M280 P0 S90 | M340 P0 S1500 | M280 S7.0 |
| Self-test | M280 P0 S120 | M340 P0 S1800 | M280 S8.4 |
| Alarm release(Push-pin up) | M280 P0 S160 | M340 P0 S2200 | M280 S10.6 |
Marlin Settings:
Marlin settings( take Marlin V1.1.X as example ) 3pin cable connects to D11, 2pin cable connects to Zmin.
(1) Set leveling pin, which can't use the same pin as endstop. Generally, on Delat machines, we use Zmin pin for BLtouch, Zmax pin for endstop. On I3 machines, we use Zmin pin as BLtouch, Zmax pin for endstop or don't use endstop. 
(2) Set leveling type 
(3) Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN 
(4) Enable BLtouch 
(5) Set the offest value of the leveling switch probe from the nozzle in the XYZ direction 
(6) Set leveling mode 
(7) Set leveling points number 
(8) Set homing center 
(9) Store the leveling settings 1) Remove "//" before the "#defing EEPROM_SETTINGS", start M500 to store the data. 
2) Open Marlin_main.cpp, find "case 28: // G28: Home all axes, one at a time gcode_G28(false);", add this sentence: "set_bed_leveling_enabled(true);" It's important to add this sentence, otherwise the leveling data can't be stored. 
(10) Remove "//" before the #"define NUM_SERVOS 3" 
